Siemens SCALANCE WLC711 Maintenance Manual page 47

Changing Log Levels
1 From the top menu, click Wireless Controller. From the left pane, click Logs. The Logs Configuration
screen is displayed.
Note
Syslog event reporting uses the syslog protocol to relay event messages to a centralized event
server on your enterprise network. In the protocol a device generates messages, a relay receives
and forwards the messages, and a collector (a syslog server) receives the messages without
relaying them.
Note
The log statements Low water mark level was reached and Incoming message dropped, because of
the rate limiting mechanism indicate that there is a burst of log messages coming to the event
server and the processing speed is slower than the incoming rate of log messages. These messages
do not indicate that the system is impaired in any way.
SCALANCE WLC711 Maintenance Guide
Performing System Maintenance
Changing Log Levels
47