Siemens SCALANCE WLC711 Maintenance Manual page 19

3) Display Backup Images
4) FTP Menu
5) Network Interface Menu
6) Manually run File System Check Utility (fsck)
7) Restore Backup Image directly from the FTP server
8) Authentication Service Management Menu
9) Flash Menu
R) Reboot
WARNING! - Forcing system recovery will erase all files, and reinstall the
selected image (either backup or factory).
Reboot will restart the system back into Normal mode.
If you have any questions about these options, please contact Support.
Your choice:
4 Do one of the following:
•
If the backup image was backed up to the local drive of the WLC711, restore from the local drive.
•
If the backup image was backed up to a remote FTP server, restore from a remote FTP server.
•
If a USB device with the backup image on it is mounted on the WLC711, restore from the USB
device.
To Restore from the Local Drive:
5 On the Rescue menu, type 1.
The list of backup images on the local drive of the wireless controller are displayed.
Currently Stored Images
-----------------------
1) AC-MV-09.01.01.0123-1.vps
2) vps-08.31.01.0192-rescue-user.tgz
B) Abort and go back to previous Menu
Please select which image to use for restoring:
Backup image names end in -rescue-user.tgz (see
Be careful not to select the upgrade image (AC-MV-09.01.01.0123-1.vps) when the backup image is
needed.
Restoring to the upgrade image will restore the system to factory defaults and lose all of the
configuration (see
6 Type the sequence number of the backup image that you want to restore.
The following message is displayed:
Selected Restore Image is:
This procedure is irreversible, do you wish to continue (Y/N)?
7 Type Y.
The wireless controller initiates the recovery process.
Performing System recovery, this may take a while...
Cleaning out normal mode partitions...
Cleaning Completed.
Mount normal mode main partition
Mounting rest of normal mode partitions...done.
Restoring from the backup image...
Restoration Completed!
Unmount normal mode partitions
System Recovery Complete!
SCALANCE WLC711 Maintenance Guide
Restoring to Factory Default
vps
-08.31.01.0192-rescue-user.tgz
Backing Up and Restoring the Image
Restoring the Backup Image from Rescue Mode
Backing Up Image File Name
on page 22).
on page 9).
19