D8024/D10024A
Introduction
Electro-static Sensitive Devices.
Take suitable ESD precautions when working inside the panel enclosure.
1.3
UL/National Approvals
•
UL Listed for "Local" or "Remote Station" use.
This equipment must be installed in accordance with these instructions, NFPA 72 and the appropriate national,
regional and local regulations specific to the country and location of the installation. Consult with the appropriate
Authority Having Jurisdiction (AHJ) for confirmation of the requirements.
1.4
EMC Compatibility
•
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. Operation of this equipment in a residential area is
likely to cause harmful interference in which case, the user will be required to correct the interference at his
own expense.
•
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more
of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and the receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
50616B
D8024/D10024A Operation and Installation Guide
Page 8
© 2002 Radionics