Table of Contents
Advertisement
1.0
Introduction
•
The material and instructions covered in this manual have been carefully checked for accuracy and are
presumed to be correct. However, the manufacturer assumes no responsibility for inaccuracies and
reserves the right to modify and revise this document without notice.
•
These instructions cover the commissioning and programming of both the D8024 and D10024A Fire Alarm
Control Panels. Refer to the Fire Alarm Control Panel Operator's Manual for instructions on powering up
and operating the system. Refer to the relevant Installation Manual for instructions on installing the panel.
1.1
Other Literature Referenced
Throughout this manual, references will be made to other documentation. See the following table (which lists the
complete part number for ordering purposes) of literature referenced in this manual for a more information on the
D8024/D10024A Fire Alarm Control Panels.
Name of document
D8024/D10024A User Manual
D8024/D10024A Operation and Installation Guide
D8024 /D10024A Networking Guide
D8024/D10024A Device Compatibility List
D9051 Installation Guide
1.2
Documentation Conventions
These conventions are intended to call out important features, items, notes, cautions, and warnings that the
reader should be aware of in reading this document.
1.2.1
Type Styles Used in this Manual
To help identify important items in the text, the following type styles are used:
Bold text
Bold Italicized
Italicized text
Courier Text
[CAPITALIZED TEXT]
1.2.2
Tips, Important Notes, Cautions and Warnings
Throughout this document, helpful tips, important notes, cautions and warnings will be presented for the reader
to keep in mind. These appear different from the rest of the text as follows:
Important Notes - should be heeded for successful operation and programming. Also tips and
shortcuts may be included here.
Caution - These caution the operator that physical damage to the program and/or equipment may
occur.
Warning - These warn of the possibility of physical damage to the operator, program and/or
equipment.
© 2002 Radionics
Table 1: Other Literature Referenced
Usually indicates selections that you may use while programming your panel. It may
also indicate an important fact that should be noted.
used to denote notes, cautions and/or warnings
Is used to reference the user to another part of this manual or another manual
entirely. It is also used to symbolize names for records that the user will create.
Text that appears like this indicates what may appear on the Control Panel display,
command center/keypad or internal printer.
Text like this is used to indicate to the user that a specific key should be pressed.
Example: ...press the [ESC] key...
D8024/D10024A Operation and Installation Guide
Page 7
D8024/D10024A
Introduction
Part Number
50618
50616
34377
50945
34048
50616B
Advertisement
Table of Contents
