16.4
Printer Set-Up Options
•
The Printer 'Set-up' allows the panel to be configured for the type of printer connected.
•
A Level 3 password must be entered before access to the printer set-up function is given.
•
Refer to the FACP User Manual for further information on the use and operation of the printer.
•
The default printer type code (2) is displayed on the printer set-up screen. To change the value, either press
NO or CHANGE and then enter the required number.
•
The following table lists the settings for each available printer type.
Model / Part
Number
D9050
© 2002 Radionics
Description
Compact Internal 1200 bps ink-ribbon printer
(D10024A only)
Table 18: Printer Settings
D8024/D10024A Operation and Installation Guide
Page 55
D8024/D10024A
Supplementary Information
Setting
2
50616B