Table of Contents
Advertisement
3.0
Installation
3.1
Front Panel Controls
A.
LCD Display
( See Section 3.1.5
Alphanumeric/Interactive
Control Keys on page 15 )
B.
System Control LED
Indicators ( See Section
3.1.3 System Control LED
Indications on page 14 )
C. Control Keys – A bank of
four keys contains the four
system control keys: Fire
Drill, Alarm Silence,
Trouble Silence and
System Reset. ( See
Section 3.1.1 Control Keys
on page 13 )
D. Zone LED Display ( See
Section 3.1.4 Zone LED
Displays on page 15 )
E.
Alphanumeric/Interactive
Control Keys - A bank of 17
keys contains interactive
and alphanumeric keys.
( See Section 3.1.2
Alphanumeric/Interactive
Control Keys on page 14 )
On the D8024, opening the
hinged panel gives access
these keys. This is located
below the Zone LED
Display.
The alphanumeric keys normally function as a numeric keypad. During programming, these keys can be
toggled to Letter Keys by pressing the CHANGE key. This gives access to letters A-M. For access to letters
N-Z, press and hold the SHIFT key while pressing the appropriate letter key.
F.
Optional Zone LED Display ( See Section 3.1.4 Zone LED Displays on page 15 )
3.1.1
Control Keys
Key Legend
Sound Alarms
Silence / Resound
Mute / Accept
System Reset
© 2002 Radionics
Figure 1: D8024/D10024A Controls and Displays
Purpose
Function
Fire Drill
Press to Turn on ALL NAC Outputs (i.e.
evacuate building manually).
Alarm
Press to Turn off all activated NACs.
Silence
Press again to re-activate the NACs.
Trouble
Press to acknowledge events and
Silence
silence the internal buzzer.
System
Press to cancel all alarm conditions and
Reset
reset the panel.
Table 4: Control Key Functions
D8024/D10024A Operation and Installation Guide
Page 13
D8024/D10024A
Installation
Sound Alarms
Silence / Resound
Mute / Accept
System Reset
Figure 2: Control Keys
50616B
Advertisement
Table of Contents
