Agilent Technologies N9310A User Manual page 173

N9310A User's Guide
-131 Invalid suffix;
The suffix does not follow the syntax described in IEEE
488.2, or the suffix is inappropriate for the device.
-134 Suffix too long;
The suffix contained more than 12 characters.
-138 Suffix not allowed;
A suffix was encountered after a numeric element which
does not allow suffixes.
-140 Character data error;
This error is generated when parsing a character data
element. This particular error message should be used if the
device cannot detect a more specific error.
-141 Invalid character data;
Either the character data element contains an invalid
character or the particular element received is not valid for
the header.
-144 Character data too long;
The character data element contains more than twelve
characters.
-148 Character data not allowed;
A legal character data element was encountered where
prohibited by the device.
Instrument Messages 7
167