Agilent Technologies N9310A User Manual page 16

1 Overview
10
6 REF IN connector
+20 dBm signal from an external reference oscillator that is
within
The connector accepts 2MHz, 5MHz, 10 MHz signal according
to your selection.
7 PULSE MOD IN connector This BNC input connector accepts a
TTL signal for pulse modulation. The damage level is 5 Vrms.
8 MOD IN connector
1.0 + 2% V (peak) signal for AM, FM, and phase modulation.
For all these modulations, +1.0 Vpeak produces the indicated
deviation or depth. The damage level is 5 Vrms.
9 Q IN connector
external quadrature- phase component of an I/Q baseband
signal. The signal level is
output level. The input impedance is 50 Ohm. The damage
level is 1 Vrms.
10 I IN connector
externally
It has the same characters with the Q baseband signal.
The I/Q IN connector is just available for external I/Q signal input
NO TE
with the Option 001.
11 VGA connector
12 USB device connectors
such as a USB memory stick.
F
emale BNC connector, accepts a –3.5 to
1
±
ppm. The nominal input impedance is 50 ohm.
This BNC input connector accepts a
This female BNC input connector accepts an
This female BNC input connector accepts an
in-phase
component of an I/Q modulation signal.
connects to an external monitor or projector.
connect with external USB devices,
2 2
+
I Q
= 0.5 Vrms for calibrated
N9310A User's Guide