Agilent Technologies N9310A User Manual page 124

6 Subsystem Command Reference
Step Points
Step Dwell
118
:SWEep:STEP:POINts <val>
:SWEep:STEP:POINts?
This command defines the number of points in a step sweep.
A step sweep must always have a minimum of two points
and can be configured to have as many as 1001 points.
The query returns the current number of points.
Range
*RST value
Returned data format
Front panel access
:SWEep:STEP:DWELl <val> <unit>
:SWEep:STEP:DWELl?
This command sets the dwell time for each point in a sweep.
The query returns the current dwell time.
Range
Valid unit
Minimum increment
*RST value
Returned data format
Front panel access
2 to 1001
10
<val>
Sweep > Step Sweep > # Points
10 ms to 1s
s, ms
0.1 ms
10.0 ms
<val> <unit>
Sweep > Step Sweep > Step Dwell
N9310A User's Guide