Agilent Technologies N9310A User Manual page 109

N9310A User's Guide
• "Pulse Modulation Subsystem"
Provides SCPI commands to configure a pulse modulation
signal.
• "I/Q Modulation Subsystem"
Provides SCPI command to configure the state of the I/Q
modulation.
• "Utility Subsystem"
Provides SCPI commands to configure the instrument
system settings.
• "Modulation State Subsystem"
Provides SCPI command to manage the modulator' s state
for AM, FM, Phase modulation, and Pulse modulation.
• "RF Output State Subsystem"
Provides a command to manage the RF output state for
CW output, RF/Amplitude sweep output, and modulation
output.
• "LF Output Subsystem"
Provides SCPI commands to configure the LF output.
Subsystem Command Reference
on page 130
on page 132
on page 133
on page 137
on page 138
on page 139
6
103