Secure Router 4134 Service Access Panel - Avaya Secure Router 4134 Installation Manual

Avaya Secure Router 4134 chassis fundamentals
Part
Fan tray
Power supply
units
External USB
drive
External
Compact Flash
card
All external
cables
DDR RAM
(DIMM)
Internal optional
modules
Internal
Compact Flash
card

Secure Router 4134 service access panel

The service access panel for the Secure Router 4134 is on the rear of the unit. Remove this
panel to perform the following tasks:
• Replace the DIMM.
• Replace the internal compact flash.
30 Installation — Chassis
Hot swap
capable
Yes
Caution:
The fan is essential to maintain optimal system
operating temperature. If you plan to replace the fan
tray while the system power is on, ensure you have
another fan tray ready to insert immediately. Watch
the fan status LED for alerts.
Yes
Caution:
Watch the power supply status LED for alerts when
you hot swap a power supply unit.
Yes The system automatically discovers a new device.
Yes The system automatically discovers a new device.
Yes —
No
Caution:
Do not open the Secure Router 4134 service access
panel while the unit is powered.
No
Caution:
Do not open the Secure Router 4134 service access
panel while the unit is powered.
No
Caution:
Do not open the Secure Router 4134 service access
panel while the unit is powered.
Comments? infodev@avaya.com
Limitations
August 2013