Chapter 4: Avaya Secure Router 4134 Chassis Fundamentals; Secure Router 4134 Chassis - Avaya Secure Router 4134 Installation Manual

Chapter 4: Avaya Secure Router 4134
Use the information in this section to familiarize yourself with the Avaya Secure Router 4134 chassis.

Secure Router 4134 chassis

The Avaya Secure Router 4134 is a secure WAN routing platform designed for use as customer
premises equipment (CPE). The Secure Router 4134 provides multiservice capabilities for
carrier- and self-managed enterprise customers. The Secure Router 4134 is modular, which
allows you to add a variety of voice, LAN, WAN, and MAN port connections in the form of
interchangeable network modules. The Secure Router 4134 is also capable of both Layer 2
and Layer 3 switching.
The Secure Router 4134 offers flexible power supply options. Power supplies are available in
the following wattage:
• 250 W AC
• 660 W AC (410 W available for PoE)
• 250 W DC
The Secure Router 4134 has two slots for power supply modules. You can install single or dual
power supply modules in any of the following configurations:
• one or two standard AC input modules
• one or two Power over Ethernet (PoE) AC input modules
• one standard AC and one PoE AC input module
• one or two DC modules
• one AC (standard or PoE) and one DC module
Caution:
As a general safety precaution, be sure to provide DC power through a circuit breaker on
the equipment rack.
The Secure Router 4134 chassis is two rack units high (3.5 inches [in.]; 8.9 centimeters [cm]).
You mount the Secure Router 4134 in a 19-in. (48.26 cm) equipment rack. Use the rack
mounting brackets to secure the Secure Router 4134 to the equipment rack.
The Secure Router 4134 has horizontal slots for small, medium, and large interface modules.
The chassis has four small slots, and three medium slots. You can adapt two medium slots to
accommodate a large module (which spans two medium slots). For more information about
Installation — Chassis
chassis fundamentals
August 2013 21