Dimensions, Clearances; 30Rqs 039 And 045-078, Units With And Without Hydraulic Module - Carrier AquaSnap Touch Pilot Junior Series Installation, Operation And Maintenance Instructions

4 - DIMENSIONS, CLEARANCES

4.1 - 30RQS 039 and 045-078, units with and without hydraulic module

For units with fans with variable available pressure (30RQSY) please refer to the pages that follow.
Legend
All dimensions are given in mm.
Control box
Water inlet.
Water outlet
B
Required clearances for air flow
C
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
12
NOTES:
A Non-certified drawings.
Refer to the certified dimensional drawings supplied
with the unit or available on request, when designing an
installation.
For the location of fixing points, weight distribution and
coordinates of the centre of gravity refer to the certified
dimensional drawings.
B In multiple-unit installations (maximum four units), the
side clearance between the units should be increased
from 1000 to 2000 mm.
C The height of the solid surface must not exceed 2 m.