Curve Tables: Check Use Of Resources (Ctabno, Ctabnomem, Ctabfno, Ctabsegid, Ctabseg, Ctabfseg, Ctabmseg, Ctabpolid, Ctabpol, Ctabfpol, Ctabmpol) - Siemens Sinumerik 840D sl Programming Manual

Axis couplings
9.2 Curve tables (CTAB)
9.2.7 Curve tables: Check use of resources (CTABNO, CTABNOMEM, CTABFNO,
CTABSEGID, CTABSEG, CTABFSEG, CTABMSEG, CTABPOLID, CTABPOL,
CTABFPOL, CTABMPOL)
Function
The programmer can use these commands to obtain up-to-date information about the use of
resources for curve tables, table segments, and polynomials.
Syntax
CTABNO
CTABNOMEM(<memory location>)
CTABFNO(<memory location>)
CTABSEGID(<n>,<memory location>)
CTABSEG(<memory location>,<segment type>)
CTABFSEG(<memory location>,<segment type>)
CTABMSEG(<memory location>,<segment type>)
CTABPOLID(<n>)
CTABPOL(<memory location>)
CTABFPOL(<memory location>)
CTABMPOL(<memory location>)
Significance
CTABNO
CTABNOMEM
CTABFNO
CTABSEGID
CTABSEG
CTABFSEG
CTABMSEG
CTABPOLID
CTABPOL
CTABFPOL
528
Determine total number of defined curve tables (in the static and the
dynamic NC memory)
Determine the number of defined curve tables in the specified
<memory location>
Determine the number of curve tables remaining possible in the
specified <memory location>
Determine the number of curve segments of the specified <segment
type> used by curve table number <n>
Determine the number of curve segments of the specified <segment
type>used in the specified <memory location>
Determine the number of curve segments of the specified <segment
type>remaining possible in the specified <memory location>
Determine the maximum possible number of curve segments of the
specified <segment type> in the specified <memory location>
Determine the number of curve polynomials used by curve table
number <n>
Determine the number of curve polynomials used in the specified
<memory location>
Determine the number of curve polynomials remaining possible in
the specified <memory location>
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning