Operating The Lights And Wipers; Headlight Switch - Lexus LS 500 2019 Owner's Manual

Hide thumbs Also See for LS 500 2019:
Table of Contents

Advertisement

4-3.Operating the lights and wipers

Headlight switch

The headlights can be operated
manually or automatically.
Operating instructions
Operating the
the lights as follows:
U.S.A.
A
Canada
B
1
The side marker, parking, tail,
license plate, instrument panel
lights, and daytime running lights
(P.179) turn on.
2
The headlights and all lights
listed above (except daytime run-
ning lights) turn on.
3
The headlights, daytime run-
ning lights (P.179) and all the
LS500_OM_(U)_1810

4-3. Operating the lights and wipers

lights listed above turn on and off
automatically.
4
ning lights turn on. (P.179)
AUTO mode can be used when
switch turns on
The engine switch is in IGNITION ON
mode.
Daytime running light system
The daytime running lights illuminate
using the same lights as the parking lights
and illuminate brighter than the parking
lights.
To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally when all of the following conditions
are met. (The daytime running lights are
not designed for use at night.)
• The engine is running
• The parking brake is released
• The headlight switch is in the
ada only),
*
: When the surroundings are bright
The daytime running lights remain on after
they illuminate, even if the parking brake is
set again.
For the U.S.A.: Daytime running lights
can be turned off by operating the switch.
Compared to turning on the headlights,
the daytime running light system offers
greater durability and consumes less
electricity, so it can help improve fuel
economy.
Headlight control sensor
(U.S.A.) Off
(Canada) The daytime run-
*
or
position
179
4
(Can-

Advertisement

Table of Contents
loading

Table of Contents