Rear Seat Position Memory - Lexus LS 500 2019 Owner's Manual

134
3-3. Adjusting the seats
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the engine switch to ACCES-
SORY mode or IGNITION ON
mode, or fasten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
■ Recalling the driving position using the
memory recall function
● Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
If a door other than the driver's door is
●
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Customization
■
Some functions can be customized.
(P.466)
LS500_OM_(U)_1810

Rear seat position memory

*
: If equipped
The rear seat position can be mem-
orized and recalled with the touch
of a button.
Recording a position into mem-
ory
1 Turn the engine switch to IGNI-
TION ON mode.
2
Display the home screen on the
Rear Multi Operation Panel
(P.308) and then touch "Seat".
3 Touch "Left" or "Right".
4
Adjust the rear seat to the desired
position and then touch "Set Mem-
ory".
5
Touch "1" or "2".
If the preset is being used, the previously
recorded seat position will be overwritten.
■ In order to correctly use the position
memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that
the rear passengers do not strike the
front seats.
*