4-3.Operating the lights and wipers
Headlight switch
The headlights can be operated
manually or automatically.
Operating instructions
Operating the
the lights as follows:
U.S.A.
A
Canada
B
1
The side marker, parking, tail,
license plate, instrument panel
lights, and daytime running lights
(P.187) turn on.
2
The headlights and all lights
listed above (except daytime run-
ning lights) turn on.
3
The headlights, daytime run-
ning lights (P.187) and all the
LS500h_OM_(U)_1810
4-3. Operating the lights and wipers
4
■
AUTO mode can be used when
switch turns on
The power switch is in ON mode.
■
Daytime running light system
The daytime running lights illuminate
●
using the same lights as the parking lights
and illuminate brighter than the parking
lights.
●
To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally when all of the following conditions
are met. (The daytime running lights are
not designed for use at night.)
• The hybrid system is operating
• The parking brake is released
• The headlight switch is in the
ada only),
*
: When the surroundings are bright
The daytime running lights remain on after
they illuminate, even if the parking brake is
set again.
●
For the U.S.A.: Daytime running lights
can be turned off by operating the switch.
●
Compared to turning on the headlights,
the daytime running light system offers
greater durability and consumes less
electricity, so it can help improve fuel
economy.
Headlight control sensor
■
lights listed above turn on and off
automatically.
(U.S.A.) Off
(Canada) The daytime run-
ning lights turn on. (P.187)
*
or
position
187
4
(Can-