Lexus LS 500 2019 Owner's Manual page 352

352
5-6. Using the other interior features
WARNING
When operating or programming
■
®
HomeLink
Never allow a child to operate or play
with the HomeLink
Programming the HomeLink
Before programming HomeLink
■
 During programming, it is possible
that garage doors, gates, or other
devices may operate. For this rea-
son, make sure that people and
objects are clear of the garage door
or other devices to prevent injury or
other potential harm.
 It is recommended that a new bat-
tery be placed in the remote control
transmitter for more accurate pro-
gramming.
 Garage door opener motors manu-
factured after 1995 may be
equipped with rolling code protec-
tion. If this is the case, you may need
a stepladder or other sturdy, safe
device to reach the "Learn" or
"Smart" button on the garage door
opener motor.
Programming HomeLink
■
Steps 1 through 3
within 60 seconds, otherwise the indi-
cator light will stop flashing and pro-
gramming will not be able to be
completed.
1
Press and release the HomeLink
button you want to program and
LS500_OM_(U)_1810
®
buttons.
®
®
®
must be performed
®
check that the HomeLink
tor light flashes (orange).
2 Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
®
from the HomeLink
®
Keep the HomeLink indicator light in
view while programming.
3 Program a device.
Programming a device other than

an entry gate (for U.S.A. owners)
Press and hold the handheld transmit-
ter button until the HomeLink
tor light changes from slowly flashing
orange to rapidly flashing green (roll-
ing code) or continuously lit green
(fixed code), then release the button.
Programming an entry gate (for

U.S.A. owners)/Programming a
device in the Canadian market
Press and release the remote control
®
indica-
buttons.
®
indica-