Lexus LS 500 2019 Owner's Manual page 243

Distance Vehicle-to-vehicle dis-
options
Approximately 130 ft. (40
Medium
Approximately 100 ft. (30
Short
Resuming follow-up cruising
when the vehicle has been
stopped by system control (vehi-
cle-to-vehicle distance control
mode)
After the vehicle ahead of you starts
off, press the "+RES" switch.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of
you starts off.
LS500_OM_(U)_1810
4-5. Using the driving support systems
Canceling and resuming the
tance
speed control
m)
m)
1 Pressing the cancel switch cancels
the speed control.
The speed control is also canceled when
the brake pedal is depressed. (When the
vehicle has been stopped by system con-
trol, depressing the brake pedal does not
cancel the setting.)
2 Pressing the "+RES" switch
resumes the cruise control and
returns vehicle speed to the set
speed.
Approach warning (vehi-
cle-to-vehicle distance control
mode)
When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehi-
cle-to-vehicle distance.
243
4