Lexus LS 500 2019 Owner's Manual page 375

Service cover
Removing the service cover
■
1
Pull up the passenger side end of
the rubber strip to disengage it
from the vehicle body.
2
Remove the service cover.
Push the tabs and lift away the service
cover.
Installing the service cover
■
1 Install the service cover.
Make sure to engage the claws on the
windshield side of the service cover when
installing the service cover.
LS500_OM_(U)_1810
6-3. Do-it-yourself maintenance
2
Engage the rubber strip to the vehi-
cle body.
NOTICE
■ Checking the service cover after
installation
Make sure that the cover is securely
installed in its original position.
Checking and adding the engine
oil
With the engine at operating tempera-
ture and turned off, check the oil level
on the dipstick.
Checking the engine oil
■
1
Park the vehicle on level ground.
After warming up the engine and
turning it off, wait more than 5 min-
utes for the oil to drain back into the
bottom of the engine.
2 Holding a rag under the end, pull
the dipstick out.
 2WD models
 AWD models
375
6