Lexus LS 500 2019 Owner's Manual page 78

78
2-1. Instrument cluster
Engine coolant temperature gauge
I
Displays the engine coolant temperature
Multi-information display
J
Presents the driver with a variety of vehicle data (P.80)
Displays warning messages if a malfunction occurs (P.425)
Rev indicator
■
When the engine speed reaches a set
speed or the red zone, a ring-shaped
indicator ( ) will be displayed on the
A
tachometer.
The indicators will be displayed in amber
when the engine speed reaches a set
speed, and in red when the engine speed
reaches the red zone.
The engine speed at which the rev indica-
tor will begin to be displayed can be set on
of the multi-information display.
(P.85)
Rev peak
■
When the engine speed reaches or
exceeds 5000 rpm, an afterimage of
the tachometer will be displayed at the
highest engine speed for approxi-
mately 1 second.
LS500_OM_(U)_1810
Outside temperature display
■
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
When "--" or "E" is displayed, the system
●
may be malfunctioning. Take your vehicle
to your Lexus dealer.
■ Liquid crystal display
P.81
Customization
■
The gauges and meters can be customized
on of the multi-information display.
(P.85)
WARNING
The information display at low tem-
■
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.