Lexus LS 500 2019 Owner's Manual page 258

258
4-5. Using the driving support systems
When an object is detected, a graphic will
be displayed on the panoramic view moni-
tor (if equipped).
Turning intuitive parking assist
on/off
Use the meter control switches to
enable/disable the Lexus parking
assist-sensor. (P.81)
1 Press or
2 Press or
and then press
3
Press or
then press
When the intuitive parking assist func-
tion is disabled, the intuitive parking
assist OFF indicator (P.68) illumi-
nates.
To re-enable the system when it was
LS500_OM_(U)_1810
to select .
to select "PKSA"
.
to select and
.
disabled, select on the multi-infor-
mation display, select
If disabled using this method, the sys-
tem will not be re-enabled by turning
the engine switch off and then to IGNI-
TION ON mode.
WARNING
When using the intuitive parking
■
assist
Observe the following precautions.
Failing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
● Do not use the sensor at speeds in
excess of 6 mph (10 km/h).
● The sensors' detection areas and reac-
tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and
drive slowly, using the brake to control
the vehicle's speed.
● Do not install accessories within the
sensors' detection areas.
● The area directly under the bumpers is
not detected.
■ When to disable the function
In the following situations, disable the
function as it may operate even though
there is no possibility of a collision.
● The vehicle is equipped with a fender
pole, wireless antenna or fog lights.
The front or rear bumper or a sensor
●
receives a strong impact.
● A non-genuine Lexus suspension
(lowered suspension, etc.) is installed.
Towing eyelets are installed.
●
● A backlit licence plate is installed.
and then On.