Lexus LS 500 2019 Owner's Manual page 141

nor "R".
To set the mirror angle used when the vehi-
cle is reversing, adjust the mirror angle at a
desired position with the shift position in R.
The adjusted angle will be memorized and
the mirror will automatically tilt to the mem-
orized angle whenever the shift position is
shifted to R from next time.
The memorized downward tilt position of
the mirror is linked to the normal position
(angle adjusted with the shift position in
other than R). Therefore, if the normal posi-
tion is changed after adjustment, the tilt
position will also change.
When the normal position is changed, read-
just the angle in reversing.
WARNING
■ When the mirror defoggers are oper-
ating
Do not touch the rear view mirror sur-
faces, as they can become very hot and
burn you.
Folding and extending the mir-
rors
Using the switch
■
Press the switch to fold the mirrors.
Press it again to extend them to the original
position.
Setting automatic mode
■
Automatic mode allows the folding or
extending of the mirrors to be linked to
LS500_OM_(U)_1810
3-4. Adjusting the steering wheel and mirrors
locking/unlocking of the doors.
Press the "AUTO" switch to set auto-
matic mode.
The indicator
Pressing the switch once more will return
to manual mode.
■ When disconnecting and reconnecting
battery terminals
The automatic folding/extending mirror
function will return to off as default. To turn
the function on, press the switch again to
select on.
■ Using automatic mode in cold weather
When automatic mode is used in cold
weather, the door mirror could freeze up
and automatic stowing and return may not
be possible. In this case, remove any ice and
snow from the door mirror, then either
operate the mirror using manual mode or
move the mirror by hand.
Customization
■
Some functions can be customized.
(P.466)
WARNING
When a mirror is moving
■
To avoid personal injury and mirror mal-
function, be careful not to get your hand
caught by the moving mirror.
141
will come on.
A
3