Average fuel economy
After reset: Displays average fuel con-
sumption since the display was reset
After start: Displays average fuel con-
sumption since engine start
After refuel: Displays average fuel con-
sumption since refuel
Average vehicle speed
After reset: Displays average vehicle
speed since the display was reset
After start: Displays average vehicle speed
since engine start
Elapsed time
After reset: Displays elapsed time since the
*1
display was reset
After start: Displays elapsed time since
engine start
Distance
Driving range: Displays driving range with
*2, 3
remaining fuel
After start: Displays the distance driven
since engine start
Other
Blank: No item
*1
: To reset, display the desired item and
press and hold
switch.
*2
: This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
*3
: When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the display
LS500_OM_(U)_1810
■
*1
*1
A
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or when
the vehicle is stopped, the light turns off.
B
Suggests the Zone of Eco driving with cur-
rent Eco driving ratio based on accelera-
tion.
C
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco Driv-
of the meter control
ing Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light
will turn off.
D
■
Displays the boost pressure. The dis-
play will change color if the specified
pressure is exceeded.
This display is intended for use as a guide-
line. Depending on factors such as the road
2-1. Instrument cluster
may not be updated.
Eco Driving Indicator
Eco Driving Indicator Light
Eco Driving Indicator Zone Display
Eco driving ratio based on acceler-
ation
Zone of Eco driving
Boost gauge
83
2