Operating The Lights And Wipers; Headlight Switch - Lexus RX200T 2017 Owner's Manual

Headlight switch

The headlights can be operated manually or automatically.
Operating instructions
Turning the end of the lever turns on the lights as follows:
The front position, tail, rear
1
side marker, license plate and
instrument panel lights turn on.
The headlights and all the
2
lights listed above turn on.
The headlights, daytime run-
3
ning lights (P. 267) and all
the lights listed above turn on
and off automatically.
(When the engine switch is in
IGNITION ON mode.)
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
2
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
On vehicles with AHS (Adaptive High-beam System), the high beams cannot be illu-
minated by pulling the lever toward you when the engine switch is off.

4-3. Operating the lights and wipers

265
4