cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the power switch to ACCES-
SORY mode or ON mode, or fas-
ten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
■
Recalling the driving position using the
memory recall function
Different driving positions can be regis-
●
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If a door other than the driver's door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Customization
■
Some functions can be customized.
(→P.481)
LS500h_OM_OM50F42U_(U)
3-3. Adjusting the seats
Rear seat position memory
*
: If equipped
The rear seat position can be mem-
orized and recalled with the touch
of a button.
Recording a position into mem-
ory
1
Turn the power switch to ON
mode.
2
Display the home screen on the
Rear Multi Operation Panel
(→P.318) and then touch "Seat".
3
Touch "Left" or "Right".
4
Adjust the rear seat to the desired
position and then touch "Set Mem-
ory".
5
Touch "1" or "2".
If the preset is being used, the previously
recorded seat position will be overwritten.
In order to correctly use the position
■
memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that
the rear passengers do not strike the
front seats.
143
*
3