Rear Seat Position Memory - Lexus LS 500h 2019 Owner's Manual

a position slightly behind the recorded
position in order to make entering the vehi-
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
Turn the power switch to ACCES-
2
SORY mode or ON mode, or fas-
ten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
Recalling the driving position using the
■
memory recall function
Different driving positions can be regis-
●
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
If a door other than the driver's door is
●
unlocked with the smart entry & start sys-
tem, the driving position cannot be
recalled. In this case, press the driving
position button which has been set.
Customization
■
Some functions can be customized.
(P.567)
LS500h_OM_General_OM50J66E
3-3. Adjusting the seats

Rear seat position memory

*
: If equipped
The rear seat position can be mem-
orized and recalled with the touch
of a button.
Recording a position into mem-
ory
1 Turn the power switch to ON
mode.
2 Display the home screen on the
Rear Multi Operation Panel
(P.402) and then touch "Seat".
3 Touch "Left" or "Right".
4 Adjust the rear seat to the desired
position and then touch "SET".
5 Touch "1" or "2".
If the preset is being used, the previously
recorded seat position will be overwritten.
In order to correctly use the position
■
memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that
the rear passengers do not strike the
front seats.
197
*
3