Safety Decals; Safety Decal Locations; Safety Decal Descriptions - Ariens Professional Sno-Thro Series Service Manual

SAFETY DECALS

The safety decals on your machine are visual reminders of
the important safety information in this manual. All
messages on your unit must be fully understood and
carefully followed. Safety decals on the machine are
explained below.
Always replace missing or damaged safety decals.
Replacement decal information is in the parts manual for
your machine. Decals can be ordered from your dealer.
See Figure 1 for safety decal locations.

Safety Decal Locations

Safety Decal Descriptions

1. CAUTION!
Danger!
Only use clean-out tool to clear blockages.
NEVER use your hands.
NEVER direct discharge towards persons or
property that may be injured or damaged by
thrown objects.
Keep people away from unit while operating.
Keep children out of work area and under
watchful care of a responsible adult.
1
Figure 1
2. DANGER!
3
2
08000519B
3. DANGER!
EN – 4
Stop engine, remove key, and read manual
before making any repairs or adjustments.
Read Operator's Manual.
Wear appropriate hearing protection.
Danger!
ROTATING PARTS! Only use clean-out tool
to clear blockages. NEVER use your hands.
High-speed auger/impeller rotates below
discharge opening. Wait for all moving parts
to stop before removing clogs or servicing.
Danger!
ROTATING PARTS! Keep clear of auger
while engine is running.
• Read Operator's Manual.
• Allow operation only by properly-trained
adult, never children.
• Stop engine and remove ignition key prior
to leaving the operator's position for any
reason.
• Keep all controls, guards and safety
devices properly serviced and functional.
• NEVER direct discharge towards persons
or property that may be injured or damaged
by thrown objects.