Bottom Cover Removal; Remove Bottom Cover - Ariens Professional Sno-Thro Series Service Manual

BOTTOM COVER REMOVAL

Remove Bottom Cover

IMPORTANT: Save all hardware for reinstallation.
WARNING: AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See Draining Fuel System on page 7.
Make sure unit is secure and will not tip.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See Service Position on
page 7.
4. Models 926068, 926070, 926336: Advance to step 7.
Models 926060, 926069, 926338: Continue to step 5.
Model 926337: Place track carriage in the "Raised
Position" and advance to step 7. Refer to Operator's
Manual. See Figure 18.
Models 926060, 926069, 926338
CAUTION: AVOID INJURY. Track carriage will
rotate freely when height adjuster plate is
removed and height adjuster is free. Keep hands
away from pinch points.
See Figure 19.
5. Remove hardware securing height adjuster plate to
height adjuster bracket.
Figure 18
6. Move height adjuster to the right, rotate away from
bottom cover and remove bottom cover. See
Figure 20.
EN – 15
Figure 19
Figure 20