Ariens Professional Sno-Thro Series Service Manual page 11

See Figure 6.
13. Remove hairpin, sleeve bushing and cable eyelet from
deflector arm under dash panel.
14. With a pliers, compress cable anchor tabs and remove
anchor from deflector bracket.
IMPORTANT: Reinstall sleeve bushing and hairpin so parts
are not misplaced.
4
1
1. Sleeve Bushing
2. Hairpin
3. Cable Anchor
4. Deflector Arm
5. Deflector Bracket
15. Remove chute deflector cable from J-clamp on engine
mount. See Figure 7.
5
3
Figure 6
2
See Figure 8.
16. Remove tapping screw securing left side of belt cover
to frame.
17. Loosen, but DO NOT remove tapping screw securing
right side of belt cover to frame. Remove belt cover.
EN – 10
Figure 7
Figure 8