Safety Decals; Safety Decal Locations; Safety Decal Descriptions - Ariens Power Brush 28 Service Manual

SAFETY DECALS

The safety decals on your machine are visual reminders of
the important safety information in this manual. All
messages on your unit must be fully understood and
carefully followed. Safety decals on the machine are
explained below.
Always replace missing or damaged safety decals.
Replacement decal information is in the parts manual for
your machine. Decals can be ordered from your dealer.
See Figure 1 for safety decal locations.

Safety Decal Locations

4
07800331

Safety Decal Descriptions

1. WARNING!
WARNING!
NEVER direct discharge towards persons or
property that may be injured or damaged by
thrown objects.
Keep people away from unit while operating.
Keep children out of work area and under
watchful care of a responsible adult.
1
2
Figure 1
2. CAUTION!
3
07800330
1
2
3. DANGER!
EN – 3
Stop engine, remove key, and read manual
before making any repairs or adjustments.
Read Operator's Manual.
Wear appropriate hearing and eye protection.
Wear a dust particle mask while operating in
dusty conditions.
CAUTION!
Be sure to engage the traction drive clutch
first. Engaging the attachment clutch before
traction drive clutch can cause the unit to
travel backwards.
DANGER!
Keep clear of brush while engine is running.
NEVER use your hands to clear blockages.
Operating on irregular terrain could cause the
brush to dig in and drive the machine
rearward.
Read operator's manual.