Battery Replacement; Remove Battery; Install Battery - Ariens Professional Sno-Thro Series Service Manual

BATTERY REPLACEMENT

Model 926334

Remove Battery

IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Remove wing knobs and other hardware retaining
battery cover and remove cover. See Figure 76.
4. Disconnect negative, then positive battery cable from
battery terminal.
5. Remove battery.
Figure 76

Install Battery

1. Install battery in battery tray so negative terminal is
positioned on the right side (from perspective of the
operator in operator's position).
2. Reconnect positive battery cable to positive battery
terminal first, then the negative cable to negative
terminal. Secure with two hex bolts, two flat steel
washers, two locking washers and two hex nuts. See
Figure 77.
3. Reinstall battery cover and route battery cables
through cutout in cover. Secure with two hex bolts, two
flat steel washers and two wing knobs. See Figure 76.
EN – 37
Figure 77