Safety Decals - Ariens Professional Sno-Thro Pro 28 Track Operator's Manual

4. Notice
NOTICE: Indicates information or procedures
that are considered important but not hazard
related. If not followed, property damage
could result.
5. Important
IMPORTANT: Indicates general reference
information worthy of special attention.

SAFETY DECALS

The safety decals on your machine are visual
reminders of the important safety information
in this manual. All messages on your unit
must be fully understood and carefully
followed. Safety decals on the machine are
explained below.
Always replace missing or damaged safety
decals. Replacement decal information is in
the parts manual for your machine. Decals
can be ordered from your dealer.
See Figure 2 for safety decal locations.
Safety Decal Locations
Figure 2
Safety Decal Descriptions
1. CAUTION!
Danger!
Only use clean-out tool to
clear blockages. NEVER
use your hands.
1
3
2. DANGER!
2
08000519B
EN - 3
NEVER direct discharge
towards persons or property
that may be injured or
damaged by thrown objects.
Keep people away from unit
while operating. Keep
children out of work area
and under watchful care of a
responsible adult.
Stop engine, remove key,
and read manual before
making any repairs or
adjustments.
Read operator's manual.
Wear appropriate hearing
protection.
Danger!
ROTATING PARTS! Only
use clean-out tool to clear
blockages. NEVER use your
hands.
High-speed auger/impeller
rotates below discharge
opening. Wait for all moving
parts to stop before
removing clogs or servicing.