Control Unit Cu320-2 - Siemens SINAMICS G130 Operating Instructions Manual

Mechanical installation

3.5 Control Unit CU320-2

3.5 Control Unit CU320-2
Description
The CU320-2 is the central Control Unit in which the closed-loop and open-loop control
functions are implemented.
Fire hazard due to overheating because of inadequate ventilation clearances
Insufficient ventilation clearances result in overheating with danger to persons as a result of
smoke and fire. This can also result in more downtimes and a reduced service life for the
Control Unit.
• For this reason, it is imperative that you maintain the 80 mm clearances above and
Dimension drawing
Figure 3-1 Dimension drawing CU320-2
42
WARNING
below the Control Unit.
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A