Siemens SINAMICS G130 Operating Instructions Manual page 6

Preface
● List Manual
The List Manual consists of the following sections:
– Parameter list
– Function diagrams
– Fault / warning list
● Documentation for Drive Control Chart (DCC)
– Programming and Operating Manual: DCC Editor description
– Function Manual: Description of the standard DCC blocks
Documentation in the Internet
The documentation on SINAMICS G130 can be found on the Internet under the following link
(https://support.industry.siemens.com/cs/ww/en/ps/13226/man).
Technical support
If you have any questions, please contact our hotline:
Phone
Fax
Internet
Phone
Fax
Internet
Phone
Fax
Internet
Spare parts
You can find spare parts on the Internet at:
https://support.industry.siemens.com/sc/de/en/sc/2110
Internet address
Information about SINAMICS can be found on the Internet at the following address:
http://www.siemens.com/sinamics
6
Time zone Europe/Africa
+49 (0) 911 895 7222
+49 (0) 911 895 7223
https://support.industry.siemens.com/sc/ww/en/sc/2090
Time zone America
+1 423 262 2522
+1 423 262 2200
techsupport.sea@siemens.com
Time zone Asia/Pacific
+86 1064 757 575
+86 1064 747 474
support.asia.automation@siemens.com
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A