Parameters, Faults And Alarms - Siemens SINAMICS G130 Operating Instructions Manual

Converter built-in units 75 kw-800 kw

Hide thumbs Also See for SINAMICS G130:

Table of Contents

Parameters, faults and alarms

• p0999[0...99] List of modified parameters 10

• p8940[0...239] CBE2x Name of Station

• p8941[0...3]

• p8942[0...3]

• p8943[0...3]

• r8950[0...239] CBE2x Name of Station actual

• r8951[0...3]

• r8952[0...3]

• r8955[0...5]

Faults and alarms

Inverter chassis units

Operating Instructions, 07/2016, A5E00331449A

List of drive objects

IF1 PROFIdrive PZD telegram selection

CBE20 firmware selection

COMM BOARD activate send configuration

CBE2x IP address

CBE2x Default Gateway

CBE2x Subnet Mask

CBE2x DHCP mode

CBE2x interfaces configuration

CBE2x IP address actual

CBE2x Default Gateway actual

CBE2x DHCP Mode actual

CBE2x MAC address

PN/COMM BOARD: Setpoint timeout

PN/COMM BOARD: No cyclic connection

EtherNetIP/COMM BOARD: Configuration error

6.10 Communication via EtherNet/IP