Siemens Gigaset S685 IP Manual page 74

Using directories and the call-by-call list
Call-by-call list
The call-by-call list is used to store access codes for network providers (called
"call-by-call numbers"), that can be put ahead of the numbers when dialling via
the fixed line network.
¤
Open the call-by-call list in idle status by pressing the C key.
Length of the entries
Number:
Name:
Storing a number in the directory
¢
s
New Entry
¤
Change multiple line input:
First Name / Surname:
Enter a name in at least one of the fields.
Phone (Home) / Phone (Office) / Phone (Mobile)
Enter a number in at least one of the fields.
E-mail
Enter e-mail address.
Annivers.
Select
With setting
Enter
type:
Caller Picture
Precondition: Calling Line Identification (CLIP).
If required, select a picture to be displayed when the caller calls.
The options are:
– Caller pictures that are supplied with the handset.
– Any additional images on the Gigaset S68H that you have loaded from
your PC to your handset (
The pictures are saved in the resource directory of the handset
£
( Page
§Save
Please note
u
For information on how to enter IP addresses,
u
If you want to dial a number using a certain line connection each time, you
can add the relevant line suffix to the number in question (
u
You can use the Web configurator to save the directory to a file on your PC,
where it can be edited and then sent back to the handset (
Or you can transfer Outlook contacts from the PC to the handset's directory.
72
max. 32 digits
max. 16 characters
or Off.
On
On:
Anniversary (Date) and
Annivers. (Signal).
152).
Press the display key to save the changes.
£
Annivers. (Time) ( Page
£
Page 236).
76) and select reminder
£
Page 46.
£
Page
£
Page
46).
209).