Siemens Gigaset S685 IP Manual page 184

Web configurator – setting the phone using a PC
Authentication password
Enter the password that you have agreed with your VoIP provider in the
tication password
word when registering with the SIP proxy/registrar server.
Enter the caller ID for your VoIP provider account (maximum 32 characters).
Username
This ID is usually identical to the first part of your SIP address (URI, your Internet
phone number).
Example
Example: If your SIP address is "987654321@provider.com", enter
"987654321" as the Username.
(optional)
Display name
Enter any name that should be shown in the other caller's display when you call
them via the Internet (example: Anna Sand). All characters in the UTF8 charac-
ter set (Unicode) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your
displayed.
Ask your VoIP provider if this feature is supported.
Area: General Provider Data
If you have downloaded the general settings for the VoIP provider from the
Gigaset configuration server (
preset with the data from the download. Generally speaking, you do not need
to configure any settings in this area.
Domain Specify the last part of your SIP address (URI) here (maximum 74 characters).
Example
For the SIP address "987654321@provider.com", enter "provider.com" in
Domain.
Proxy server address
The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the
(fully-qualified) DNS name of your SIP proxy server (maximum 74 characters).
Example: myprovider.com.
Proxy server port
Enter the number of the communication port that the SIP proxy uses to send
and receive signalling data (SIP port).
Port 5060 is used by most VoIP providers.
Registrar server
Enter the (fully-qualified) DNS name or the IP address of the registrar server
(maximum 74 characters).
The registrar is needed when the phone is registered. It assigns the public IP
address/port number to your SIP address (Username@Domain) that were used by
the phone at registration. With most VoIP providers, the registrar server is iden-
tical to the SIP server. Example: reg.myprovider.com.
182
field (maximum 32 characters). The phone needs the pass-
Username
£
Page
or your VoIP phone number will be
180), then the fields in this area will be
Authen-