Siemens Gigaset S685 IP Manual page 192

Hide thumbs Also See for Gigaset S685 IP:
Table of Contents

Advertisement

Web configurator – setting the phone using a PC
If the phone always starts by trying to establish a broadband connection, put
the
G.722
Please note
u
You should only deactivate codecs (put them in the
there is a particular reason. The more codecs that are deactivated, the
greater the danger that calls will not be able to be established due to unsuc-
cessful codec negotiations. In particular you can only establish broadband
connections if you permit the
u
With incoming calls, all supported voice codecs are always permitted.
Area:
Settings for Codecs
To save additional bandwidth and transmission capacity, on VoIP connections
that use the
pauses ("Silence Suppression"). Then, instead of the background noises in your
environment, your caller hears a synthetic noise generated in the receiver.
Please note: "Silence Suppression" can sometimes lead to deterioration in the
voice quality.
¤
In the
data packets during pauses should be suppressed when using the
codec, (select Yes).
Saving settings on the phone
¤
Select
Please note
You should observe the following for good voice quality:
u
When making calls using VoIP, avoid performing other Internet activities
(e.g. surfing the Internet).
u
Please note that voice delays can occur depending on the codec used and
the network capacity utilisation.
190
codec at the top of the
codec you can suppress the transmission of voice packets in
G.729
Enable Annex B for codec G.729
Set
to save the settings for the voice quality.
list.
Selected codecs
G.722
codec.
field, state whether the transmission of
Available codecs
list) if
G.729

Advertisement

Table of Contents
loading

Table of Contents