Siemens Gigaset S685 IP Manual page 180

Web configurator – setting the phone using a PC
Line suffix that you have to add to the phone number of an outgoing call to
Suffix
allow the account assigned to the suffix to be used as the sending account.
Example
If you dial 123456765#1, the connection will be made and billed through the
first VoIP account, regardless of the VoIP number you have assigned to your
handset as the send number and whether you briefly press/press and hold the
talk key.
If you dial 123456765#0, the connection will be made via the fixed line net-
work.
Status The status of the connection will be shown for VoIP connections:
Registered
The connection is activated. The phone has been successfully registered.
You can use the connection to make calls.
Disabled
The connection is deactivated. The phone is not registering with the corre-
sponding account with the VoIP service. You cannot use the connection to
make or receive calls.
Registration failed
Your phone was unable to register with the VoIP service, e.g. because the
VoIP access data is incorrect or incomplete or the phone is not connected to
the Internet. You can find further information in the section
answers"
Active You can use the option in the
VoIP connections. If a connection is deactivated, the phone will not register for
this connection. The connection can be activated/deactivated by clicking
directly on the option. The change does not need to be saved.
To configure a connection or to change the configuration of a connection:
¤
Select
This will open a Web page where you can make the settings needed. More
information is available
u
in the section
u
in the section
u
in the section
178
/
Server not accessible
£
Page 216.
Edit button next to the connection.
"Configuring the VoIP
"Configuring the fixed line
"Configuring the Gigaset.net
Active column to activate (
connection",
connection",
connection",
"Questions and
) and deactivate (
£
Page 179 or
£
Page 186 or
£
Page 186.
)