Siemens Gigaset S685 IP Manual page 182

Web configurator – setting the phone using a PC
Area: Auto Configuration
The entire configuration process or a large part of the configuration for a VoIP
connection is automated for many VoIP providers. You can download the nec-
essary VoIP access data to your phone from the Internet.
You have the following options:
u
Fully automated configuration
Preconditions:
– You have received an auto configuration code from your VoIP provider.
– The general access data for your VoIP provider is available for download-
ing.
You can download all the data required for VoIP access from the Internet:
¤
Enter the auto-configuration code you received from your VoIP provider
in the
mum 32 characters).
¤
Select the
The telephone establishes a connection to the Internet and downloads all
data required for the VoIP connection, i.e. the general provider information
and your personal provider data (account data) are saved to your base sta-
tion.
If you have already entered details on the Web page, this is deleted as soon
as Start Auto Configuration
and General Provider Data
are overwritten by the downloaded data.
Generally, you should not have to enter any additional data on this
Web page.
Please note
If the message
data will be loaded onto the phone. Possible causes of this are:
u
The incorrect code has been entered (e.g. upper/lower case rules have
not been followed). If necessary, enter the code again.
u
The file that has been downloaded is invalid. Please consult your VoIP
provider.
When the download is complete, the
¤
Activate the connection as described on
You can then be reached on the corresponding VoIP phone number.
u
Automatic configuration of general VoIP provider data
Precondition: You have received your account details from your VoIP pro-
vider (e.g.
Profile files for the most important VoIP providers are available to download
from the Internet via the Gigaset configuration server. The address for the
server is stored in your phone (
To load the data onto your telephone, proceed as follows:
¤
Select
information on the download procedure.
180
area in the
Auto Configuration
Start Auto Configuration
is selected. The fields in the
areas and the server addresses in the
Download of settings not possible! File is corrupt!
Authentication Name,
in the
Select VoIP Provider
Auto Configuration Code
button.
Connections list will be displayed.
Page 185.
Authentication password).
£
Page 212).
Auto Configuration
field (maxi-
Personal Provider Data
Network area
appears, no
area. This will display