Siemens Gigaset S685 IP Manual page 67

u
Transferring (provider dependent):
Precondition:
– You are call swapping and you phoned the currently active participant
yourself.
– You are connected to an external participant whom you have called your-
self and start an external consultation call.
¤
You can also end the call before the second participant answers.
¤
To connect the two external participants:
Call Transfer
§Options§
If the call transfer was successful, a message will appear to this effect.
The handset will then switch to idle.
If the call transfer was not successful, the party that was previously waiting
will call you back automatically.
Please note
You can configure your telephone so that you can also connect the partici-
pants by pressing the S key or the end call key a (
Accepting a waiting call
Precondition: Call waiting is activated (
¢
Accept waiting call
§Options§
You have the option of call swapping or holding a conference call.
Please note
u
If the first call was an internal call, the internal connection is ended.
u
An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
Rejecting a waiting call
¢
Reject waiting call
§Options§
Making calls via network services
£
£
Page 63).
Page 201).
65