Setting Up The Handset For Use - Siemens Gigaset S685 IP Manual

First steps

Setting up the handset for use

Inserting the batteries and closing the battery cover
Warning
Only use the rechargeable batteries (
Communications GmbH
battery or other battery types as this could result in significant health risks and
personal injury. For example, the outer casing of the batteries could be dam-
aged or the batteries could explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
The handset switches on
automatically. You will hear a
confirmation tone.
¤
If you need to open the battery
cover again, for instance to
replace the batteries, remove
the belt clip (if fitted), place your
fingertip in the cavity on the
casing and pull the battery cover
upwards.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG
14
The display is protected by a plastic film.
Please remove the protective film!
*
, i.e. never use a conventional (non-rechargeable)
£
Page 229) recommended by Gigaset
¤
First align the notches on the
side of the battery cover with
the lugs on the inside of the
casing.
¤
Then press the cover until it
clicks into place.