Setting The Phone's Ip Address In Lan - Siemens Gigaset S685 IP Manual

Setting the phone's IP address in LAN

The base station requires an IP address in order to be "recognised" by the LAN.
The IP address can be assigned to the base station automatically (by the router)
or manually.
u
If performed dynamically, the router's DHCP server automatically assigns
the base station an IP address. The base station's IP address can be changed
according to router settings.
u
If performed manually/statically, you assign the base station a static IP
address. This may be necessary depending on your network configuration.
ú For how to make the local network settings on the Web configurator, turn to
Page 174.
Please note
To assign the IP address dynamically, the DHCP server on the router must be
activated. Please also read the user guide for your router.
¢
v Ð
~
¤
Change multiple line input:
IP Address Type:
Select
If you select Static, you must manually define the IP address and the subnet
mask for the base station in the next lines, as well as the standard gateway
and DNS server.
IP Address:
For IP Address Type
The IP address that is currently assigned to the base station will be displayed.
It cannot be amended.
For
IP Address Type
Enter the IP address that is to be assigned to the base station (overwriting
the current settings).
192.168.2.2 has been preset.
For information on the IP address, please see
Page
¢ ¢
Base Local Network
Enter the system PIN and press
Static or Dynamic.
= Dynamic:
= Static:
255.
Making VoIP settings
.
§OK§
Page 174 and the glossary on
161