Siemens Gigaset S685 IP Manual page 119

If there are new messages, playback begins with the first new message. If the
message has been saved with the date and time, you will hear an appropriate
announcement before playback begins. All messages are played back irrespec-
tive of the receive number.
After the last new message you will hear the end tone and an announcement
about how much recording time remains.
You can listen to old messages if there are no more new messages. If necessary
begin playback again, as described above.
Listening to messages via key
Preconditions: The answering machine has been set to fast access
£
( Page 121). At least one of your handset's send/receive numbers matches
the receive number of a stored message (
¤
Press and hold key .
The stored messages are now played back.
Pausing and controlling playback
During message playback:
2 Pause playback. Press 2 again to resume.
t or
Skip to the previous message.
s or 3
Skip to the next message.
2 x s
Skip to next-but-one message.
If playback is interrupted for over a minute, the answering machine returns to
idle status.
Marking a message as "new"
A previously played back "old" message is displayed as a "new" message again.
During message playback or pause:
*
Press the star key.
Or:
Open menu.
§Options§
Mark as New
Select and press
Playback of the current message is cancelled. Playback of next message starts,
if applicable.
The f key on the handset flashes.
Copying the phone number of a message to the directory
See "Copying a displayed number to the
Operating the base station answering machine
£
Page
.
§OK§
directory",
194).
£
Page 76.
117