Siemens Gigaset S685 IP Manual page 124

Operating the base station answering machine
You can control message playback by means of the keypad.
Please note
The answering machine will terminate the connection under the following
circumstances:
u
An incorrect system PIN has been entered.
u
There are no messages in the answering machine.
u
After the remaining memory has been specified.
Operating the answering machine via the keypad
The following keys are used for operation:
A
B
3
:
0
Cancelling remote operation
¤
Press the end call key or replace the receiver.
Activating the answering machine
¤
Phone home and allow the phone to ring for around a minute. Use a phone
number that has been assigned to the answering machine as a receive
number.
You hear: "Please enter PIN".
~
Your answering machine is activated in the set mode (
how much memory time is left.
The messages are now played back.
The answering machine cannot be deactivated remotely.
122
Previous:
Go to the start of the current message. Press repeatedly to go to the
previous messages.
Stop/resume:
Stop playback. Press again to resume.
If there is a pause lasting longer than one minute, the connection
to the answering machine is terminated.
Next:
Skip to next message. Press several times to go to the following
messages.
New:
Mark current message as "new". Start playback of the following
message.
Delete:
Delete current message.
Enter system PIN.
£
Page 114). It tells you