Table of Contents
Advertisement
38 Lighting, windscreen wipers and washers ›
Operation
Switching on
Switching off
›
Manually switch the high beam on or off.
Settings
Activation/deactivation
The function is activated or deactivated in the fol-
lowing menu in the Infotainment system.
Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
After changing a bulb in the low beam light, the main
beam or fog light, have the headlights adjusted by a
specialist garage.
CAUTION
Halogen lamps are pressurised and can burst during
replacement!
Wear gloves and safety goggles.
▶
NOTICE
Contamination of the halogen lamp reduces the life
of the lamp!
Do not touch the glass of the light bulb with your
▶
bare fingers.
NOTICE
Danger of headlight damage due to the ingress of
water and dirt!
Always fit the protective cap on the headlight cor-
▶
rectly after changing a bulb.
Conditions for changing a bulb
✓ Ignition switched off.
✓ Light switched off.
Replace light bulbs
›
Push the lever in the
direction of the arrow.
in the instrument
cluster lights up.
Fog lights
›
Attach the connector to the bulb, ensuring it clicks
into place.
›
Insert the light again and tighten.
›
Replace the cover and press it in until it clicks into
place.
›
Release the cover with
the bracket from the
tool kit and remove it.
›
Unscrew the screws
.
A
›
Remove the light.
›
Release the connector
and remove it from the
bulb.
›
Turn the bulb and re-
move it.
›
Insert the new bulb in-
to the light so that the
guide lugs on the bulb
are aligned with the
corresponding open-
ings in the light.
›
Turn the bulb clock-
wise
to secure.
Advertisement
Table of Contents
