Table of Contents
Advertisement
48 Driver information system ›
Average speed
C
Average fuel consumption
D
Evaluation of driving economy - Drive
E
GreenFunction (depending on Infotainment
type)
» page 100
Graphical fuel gauge - If the expected range is
F
less than 300 km, the vehicle slowly approaches
the symbol
Range
G
Memory
The system saves the driving data in the following
memories.
From start or "1" (depending on display type)
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long term or "2" (depending on display type)
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
From refuelling or "3" (depending on display type)
Driving data from the time the fuel tank was last
▶
filled is stored in the memory. The memory is reset
the next time the tank is filled.
Operation
Display driving data in the display of the instru-
ment cluster via the operating lever
›
The menu item driving data in the main menu in the
display of the instrument cluster.
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
›
The menu item driving data in the main menu in the
display of the instrument cluster.
Driving data
Press - Select infor-
A
mation/Set values
Press - Confirm in-
B
formation
Rotate - Select in-
A
formation/Set values
Press - Confirm in-
formation
Displaying driving data in the infotainment system
The driving data is displayed in the menu in the info-
tainment system.
Driving data
Or:
Driving data
Select and reset the memory for driving data in
the display of the instrument cluster using the
control lever
.
A
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Selecting the memory in the infotainment system
To select the memory, use the functional areas
in the following menu in the infotainment system.
Driving data
Or:
Driving data
Resetting the memory in the infotainment system
The memory is reset in the following menu in the in-
fotainment system.
Or:
Settings
Select driving data to be displayed
The driving data to be displayed is selected in the
following Infotainment menu:
Or:
›
To set the memory for
the displayed driving
data, press button
A
repeatedly.
›
To reset the memory,
press and hold button
›
To set the memory for
the displayed driving
data, press selection
wheel
repeatedly.
A
›
To resetthe memory ,
hold the dial
.
A
Advertisement
Table of Contents
