NOTICE
Risk of damage to the key!
Place the tow bar in the standby position, with the
▶
key upwards, and store in the box.
Inserting tow bar
Inserting
lease bolt is visible.
CAUTION
Risk of injury!
When attaching the tow bar, keep your hands out
▶
of the operating lever's range of rotation.
›
Grab hold of the tow
bar from below.
›
Push the release bolt in
as far as it will go,
while at the same time
pressing the operating
lever as far as it will go.
The tow bar disengag-
es and falls freely
down into your hand.
›
Insert the cover cap
for the mounting re-
cess.
›
Remove the cover cap
from the mounting re-
cess.
›
Grab hold of the tow
bar from below.
›
Insert the tow bar into
the mounting recess
until it clicks into place.
The control lever ro-
tates upwards and the
release pin moves out.
The red as well as the
green part of the re-
Roof rack and hitch ›
Removable tow coupling
Applying
Inspecting attachment
✓ The tow bar sits firmly in the mounting recess. It
has no clearance when it is shook with force.
✓ The operating lever
A
✓ The release bolt
is protruding fully. The red as
B
well as the green part of the release bolt is visible.
✓ The key is removed and cap
lock.
Couple or unhitch trailer or accessory
The following information describes the procedure
for coupling and uncoupling a trailer. The information
also refers to another accessory, e.g. a bike carrier.
WARNING
Risk of an accident!
Do not use the safety eye for towing.
▶
Distribute and fix the load correctly.
▶
The trailer has a 13-pin electrical socket. If the
trailer have a 7-pin connector, use a corresponding
adapter from the ŠKODA Original Accessories.
139
›
Turn the key.
The green mark must
be pointing upwards.
›
Remove the key.
›
Fit the cap on the lock.
is in the upper position.
is attached to the
C