Table of Contents
Advertisement
52
Infotainment Blues ›
Possible symbols in the status bar
Repeated playback of the current track
Play/pause the current album/folder
Shuffle the current album/folder
Sound off
A traffic information station is available
No traffic information station is available
Operation
Select the audio source
›
To Change between the available sources, press
.
The Infotainment only switches between connected
audio sources with playable content.
Operation - Basics
Start playback/pause
Press: play the next song
Hold: fast forward within the track
Press within 3 seconds of starting playback:
play the previous track
Press after 3 seconds of the start of playback:
play the current track from the beginning
Hold: fast rewind within the track
Change to the previous folder/playlist
Change to the next folder/playlist
Settings
Switch random play on/off
›
In the Media menu, press
›
Choose the Mix menu.
›
To turn on, choose On.
›
To turn off, choose Off.
Repeat playback
›
In the Media menu, press
›
Choose the Repeat menu.
›
For repeated playback of all tracks and folders,
choose All.
›
For repeated playback of the tracks in the cur-
rent folder, choose Track.
Media
Information line
A
Name of the track
B
being played
Status bar
C
.
.
›
For repeated playback of the current folders,
choose Folder.
Switch Traffic Reception (TP) on/off
Applies to the FM frequency range.
›
In the Media
menu, press
›
To turn on, choose Yes.
›
To turn off, choose No.
SD card
NOTICE
Risk of damaging the SD card reader!
Do not use SD cards with a broken slide for write
▶
protection.
›
To Insert the SD card, with the bevelled corner to
the right, push into the slot in the external module
until it snaps into place.
›
To Remove, press on the inserted SD card.
The SD card moves to the eject position.
NOTICE
When using an SD card with an adapter, vehicle vi-
brations might cause the card to fall out of the
adapter.
USB device
›
To Connect, insert the USB device into the appro-
priate port.
To play audio files, use USB ports that support data
transfer.
A USB device can be connected directly to the
USB port or via a connection cable.
We recommend that you use extension cords from
ŠKODA original accessories.
USB extension cables or reducers may affect the
playback function of the connected device.
Load USB audio source
After connecting the USB device, charging will start
automatically when the following conditions are met.
✓ The ignition is switched on.
✓ The USB device allows charging.
The charging efficiency can be different compared to
the charging from the usual mains power supply.
Depending on the type of the connected USB device
and the frequency of use, the charging current may
not be sufficient to charge the battery of the con-
nected device.
Some connected audio sources may not be recog-
nised and cannot be charged.
.
Advertisement
Table of Contents
